Propane Forced Air MH-0375-LM10
MH-0375-LM10
Frame: Heavy-duty steel construction with steel base · Easy-lift handle for portability at home or on the job site
Components: One touch ignition and heat control for easy operation · 10-foot hose and regulator · High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector - connects heater to propane tank via a supply hose
Heat Output: Adjustable thermostat
For use in workshops, garages, construction sites and farms with proper ventilation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.
Important Notes:
-Not for use in residential living areas or inadequately ventilated areas.
-Proper ventilation required during operation.
-Must be plugged into an approved standard electrical outlet for operation.
Specifications
| Heat Output | 225-375,000 BTU |
| Hot-Air Flow | 1,500 CFM |
| AC Power | 120V, 60Hz, 1.45 Amps |
| Motor Size | 1/5 HP |
| Fuel | Propane |
| Fuel Consumption | 10.4 to 17.4 lb./hr. |
| Required Cylinder Size | (2) 100 lb. |
| Maximum Operating Hours (per required cylinder size) | 11.5 hours |
| Heating Area | 9,000 sq. ft. |
| Adjustable Thermostat | Yes |
| Adjustable Height Angle | No |
| 10-Foot Hose & Regulator | Yes |
| Heat Source | Propane |
Weights & Dimensions
| Net Weight | 41.00 lbs. |
| Shipping Weight | 49.00 lbs. |
| Length | 34.00 in. |
| Width | 12.60 in. |
| Height | 18.50 in. |
